]
11/13/2008 8:21:36 PM EST
Just got my Eotech 512 on the advice of an ex marine.Told me both EOTech and aimpoint are good and has used both. He pointed out the differences and flaws in both and EOTech won out. Cant wait to take it out.
llamanator
11/13/2008 8:28:41 PM EST
I love my Eotech 512 on my stag. Though i will replace it with an acog ta01nsn sooner or later.

OhioShemanese
11/13/2008 8:32:10 PM EST
I have a Eotech 512 and 552, unless you will even uss NVGs Eotech 512 is a good option. I have even mounted my 552 on my AR-50 50BMG and it handled the recoil great. It will work fine out 200 meters.
redneckarmy34
11/13/2008 9:16:46 PM EST
I love my 512
Shop around and you should be able to get one under $350
cp9122
11/13/2008 11:13:10 PM EST

-
Vortex Optics

Shooting Targets -

Thanks, 1981 Circuits 11/23/2010 4:13:49 PM If it doesn't have a date code, or the "restricted" markings, and it's not of a type which was not made until after the ban was in place, then it's presumed to be pre-ban. Basically, an unmarked GI pattern magazine is presumptively pre-ban. Different

11/23/2010 9:08:36 PM Originally Posted By 1981: II'm still unsure how I can ID a pre ban M14 Scope Mounts mag?

Torment

12/24/2009 7:16:18 AM In the late nineties I to bought that model in SS. I had a SS fetish, I liked the look. Things change however and that barrel sits here in wrap. A heavy match contour Krieger 1-10 CM steel barrel now is attached to that receiver. The receiver, USGI bolt/op rod and NM flash hider are the only things left of the original rifle. Crazy just just how far the love of a rifle might take you. You'll see. Along with a few mags I'd suggest you fling the stamped steel spring guide with a quality NM unit right away. For the minimal cost and ease of replacement you'll be happer than you already are with your new rifle. You'll feel the difference it makes.

 

I just won a $100 gift certificate from Warne Rings (Thanks Warne! -

Jason JTAC Supply JTAC_Supply 6/8/2004 2:41:07 More packages in stock this week. Jason JTAC_Supply 6/15/2004 10:41:02 PM btt hepcat85 6/16/2004 8:56:24 BUMP!

For us it was a test of faith as neither of us had ever tried out a pair of the Pro Ears. I wanted to send you an e-mail and let you know that our test of faith was well worth taking, we are both absolutely thrilled with our Pro Ears. I had been having problems with the ear protection I had been using not damping the noise (even with foam plugs in the ear) and was in pain when at the range. The big test for my new Pro Ears was sitting through a class where close to 1500 rounds were fired. I was very comfortable the entire time. As for my mother's experience, she has found that when she takes her Pro Ears off after shooting, she doesn't have the muffled "in a well" sound previously experienced with other hearing protection protection. To quote her, "we are sold on Pro Ears." And on a "girly" note, thank you for offering the pink. Sincerely, Adrienne H. More Great Customer Care Thank you for outstanding customer support!

-
harris bipod

docHOLLOWAY:
any of you guys have one
thinking about getting one, how do they perform? do you guys like em? -
Magpul PRS

Shooting Targets -


Duh! Do not pray for easier life’s, pray to be stronger men. – JFK User Info IM User Email User Reply Quote Report benw8887 Bronze Contributor Joined: Dec 2009 NM, Severed heads equal open minds! Offline Posts: 742 Link To This Post Blog User Blog Media Media Collections EE Feedback 0% (0) Posted: 10/26/2011 11:00:14 [...]

Duh!

Do not pray for easier life’s, pray to be stronger men. – JFK
User Info
IM User
Email User
Reply
Quote
Report
benw8887
Bronze Contributor

Joined: Dec 2009
NM,
Severed heads equal open minds!
Offline
Posts: 742
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 0% (0)
Posted: 10/26/2011 11:00:14 PM EST
Finally got my C&R Yugo from the store today. I don’t think this thing has ever been cleaned.Did that SKS Rifle Stocks Bullpup stock ever go anywhere? Does anyone have one? I have an SKS Rifle Stocks that I would like to make a little more interesting.

EDIT:

The G2 LED is a very good weapons light if you have an AR, but is too long for your S&W. I’ve had poor experience with Insight for both light-only and light-laser. I don’t like the locking mechanism on their units, and was disappointed in the lights. Not as bright as the LED competitors from [...]

The G2 LED is a very good weapons light if you have an AR, but is too long for your S&W. I’ve had poor experience with Insight for both light-only and light-laser. I don’t like the locking mechanism on their units, and was disappointed in the lights. Not as bright as the LED competitors from streamlight and SureFire, and focus was not as good. Stephen7942 6/6/2008 5:21:11 PM Thanks for all your help guys. I want a light that will blind the sob that comes in my door… if you know what i mean. I think im gonna spent the extra dough and go with the SureFire X300…although i want a light-laser combo…I will do some more pondering over the 2 and make a decision in the near future. Thanks again for the input. Stephen HeliBoy 6/7/2008 12:32:21 PM Give Kevin over @

Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (2)
Posted: 10/9/2011 3:17:29 PM EST
[Last Edit: 10/9/2011 3:21:22 PM EST by DanTSX]
There really isn’t a bad SKS Rifle Stocks unless dome dumb hick dragged it through the TAPCO catalog. They are fun guns to shoot. Every gun owner should have one.

$295 is pretty fair in today’s market for a norinco. You can find them for slightly less, but it will take lots of time and persistence to save $30-$50.

[NO TEXT]
User Info
c
Email User
Reply
Quote
Report
Aptrgangr
Bronze Contributor

Joined: Mar 2010
TX,

Posts: 1366
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 0% (0)
Posted: 10/9/2011 4:45:48 PM EST
GLNIC: Was a company incorporated in Los Angeles, California in May of 1986. They were reportedly an import company owned exclusively by the PLA. Guangdon Lingnan Ind.

Mark Twain User Info Gablackgus Member : Jun 2011 USA GA, USA Offline Posts: 1 Feedback: 0% (0) Link To This Post Posted: 6/22/2011 12:15:10 Guys- Check out www.BROWE -inc.com that will give you the low-down. The big deal on this optic is uses a micro-processor to actually measure the light at the target- not [...]

Mark Twain User Info Gablackgus Member : Jun 2011 USA GA, USA Offline Posts: 1 Feedback: 0% (0) Link To This Post Posted: 6/22/2011 12:15:10 Guys- Check out www.BROWE -inc.com that will give you the low-down. The big deal on this optic is uses a micro-processor to actually measure the light at the target- not [...]

Mark Twain User Info Gablackgus Member : Jun 2011 USA GA, USA Offline Posts: 1 Feedback: 0% (0) Link To This Post Posted: 6/22/2011 12:15:10 Guys- Check out www.BROWE -inc.com that will give you the low-down. The big deal on this optic is uses a micro-processor to actually measure the light at the target- not where your standing. This means your reticle will automatically adjust itself as you move from target to target adjusting for each lighting scenario. This eliminates the problems with other optics that use ambient light. Your reticle wont disappear in with a bright target, and wont overpower with a low light target. The housing is also titanium rather than aluminum, and it only comes with an a.r.m.s. lever mount. You can also program the optic to your personal preferences on how bright or dim you want your reticle. Hope that helps! User Info 1811guy Member : May 2006 USA USA Offline Posts: 850 Feedback: 100% (5) Link To This Post Posted: 6/22/2011 12:22:54 Originally Posted By Gablackgus: Guys- Check out www.BROWE -inc.com that will give you the low-down. The big deal on this optic is uses a micro-processor to actually measure the light at the target- not where your standing. This means your reticle will automatically adjust itself as you move from target to target adjusting for each lighting scenario. This eliminates the problems with other optics that use ambient light. Your reticle wont disappear in with a bright target, and wont overpower with a low light target. The housing is also titanium rather than aluminum, and it only comes with an a.r.m.s. lever mount. You can also program the optic to your personal preferences on how bright or dim you want your reticle. Hope that helps! Don’t need titanium, my TA01′s adjust themselves to ambient light coming in without electronics, and I would rather have a LaRue mount anyway (already tried the ARMS mounts). I still think these optics are going to be a tough sell. Oh, one more thing, no bible verses. That’s a deal killer right there. Maybe he can market his scopes to atheists. User Info Gablackgus Member :

User Info
IM User
Email User
Reply
Quote
Report
KILLERB6
Bronze Contributor
Team Member

Joined: Jan 2002
AFG AFG
Military
“The men with green eyes”
Offline
Posts: 9630
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 10/19/2011 8:39:52 AM EDT
[: 10/20/2011 1:21:48 by KILLERB6]
Unless you are bench resting andshooting targetsshooting, you probably will not notice any difference between 7n6 and quality (Fed, IMI, etc.) 556.

I have an LWRC M6AK and it shoots essentially as well as my 556.

Terminal ballistics of 7n6 are better (IMO) than all but the exotic 556 rounds.
RegionRat
Bronze Contributor
Team Member

Joined: Jun 2010
USA CA, USA
Member
Offline
Posts: 421
Link To This Post
Blog User Blog
Media Media Collections 0% (0): 10/19/2011 12:00:37
I have a M1S with 20″ bbl and float tube, NM iron sights, plain muzzle.
From the prone position as in Service Rifle, it will hold the X ring @ 100 yards using the SR-1 and SR-21 targets, using surplus.
Sorry, but I don’t have any scanned in. I built this for the kid to have cheap short range practise and it becomes everybody’s favorite once they shoot it….
sefus
Member
Member

Joined: Sep 2008
USA WA, USA
Offline
Posts: 133
Link To 100% (1): 10/19/2011 2:41:18
Kind of a drift but is there really much of a gain (other than sight radius if using irons) in going with the 20″ barrel instead of a 16″? I mean the 5.45 velocity is up there anyway and doesn’t lose much out of a short barrel so does the extra few inches stabilize even more to show a big difference accuracy wise?
LRRPF52
Bronze Contributor
Team Member

Joined: Oct 2011
USA UT, USA
Member
Online
Posts: 167
Link To This Post
Blog User Blog
Media Media Collections 0% (0): 10/19/2011 3:17:49
5.45 was designed for use in 16″ barrels, and has some great velocity already out of a 16″, so I see no practical benefits in a longer pipe. Vuurwapen did a great video on 5.45 at 600yds, and printed some nice groups at that range as well, which is way more performance than the Soviets ever envisioned for the caliber, unless talking about a long-barreled RPKS-74.

RandyStacyE
Member
Member

Joined: Mar 2008
USA IN, USA
Offline
Posts: 1536
Link To 0% (0): 10/19/2011 9:35:16
^ ^ ^ WOW . . . he used an ACOG and scored that at 600 yards !

Very nice!
Shooter_G22
Member
Member

Joined: Jan 2011
USA TX, USA
Offline
Posts: 292
Link To 0% (0): 10/19/2011 11:46:19
so then this 5.45 is actually a pretty good accurate round??? why is everybody talking about Cproduct mags for this… will regular Pmags not work..????

so is it safe to say that a 5.45 Ar should be able to produce 1moa or better????

JesseJames
Bronze Contributor
Team Member

Joined: Nov 2002
USA PA, USA
Have You Evolved?
Offline
Posts: 2568
Link To This Post
Blog User Blog
Media Media Collections 100% (212): 10/20/2011 11:33:56 AM EDT
5.45 hits stuff that I point it at as far as I can see with the naked eye. I don’t shoot paper so I’m not sure what groups I’m getting.
KILLERB6
Bronze Contributor
Team Member

Joined: Jan 2002
AFG AFG
Military
“The men with green eyes”
Offline
Posts: 9672
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 10/20/2011 1:41:07
Originally Posted By Shooter_G22:
so then this 5.45 is actually a pretty good accurate round??? why is everybody talking about Cproduct mags for this… will regular Pmags not work..????

so is it safe to say that a 5.45 Ar should be able to produce 1moa or better????

If you search, there was a recent post (not necessarily here ) by someone who modified PMag followers to work with 5.45 to near if not full capacity. Unmodified, the case taper of the 5.45 round causes the rounds to bind at far less than full (30 round) capacity.

I don’t know as I have had what I guess is extremely good luck with C-Products mags.
vicious_cb
Member
Member

Joined: Aug 2005
USA USA
Offline
Posts: 1487
Link To 0% (0): 10/20/2011 1:45:38
Originally Posted By KILLERB6:

Terminal ballistics of 7n6 are better (IMO) than all but the exotic 556 rounds.

5.56 fragments, 5.45 does not….

KILLERB6
Bronze Contributor
Team Member

Joined: Jan 2002
AFG AFG
Military
“The men with green eyes”
Offline
Posts: 9675
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 10/20/2011 2:49:11
[: 10/20/2011 2:53:33 by KILLERB6]
Originally Posted By vicious_cb:
Originally Posted By KILLERB6:

Terminal ballistics of 7n6 are better (IMO) than all but the exotic 556 rounds.

5.56 fragments, 5.45 does not….

Exotic rounds, yes; others no.

The “not really a hollow point” tip of 7n6 allows the nose to “collapse” on impact and tumble.

Remember, we are talking about surplus rounds which are around $0.15 each, not exotic Mk7422 at $1.00 each.

If I had a choice of which I was going to be shot with, it would NOT be 7n6 5.45.
ColonelPanic
Member
Member

Joined: Mar 2010
USA USA
Offline
Posts: 302
Link To 0% (0): 10/20/2011 3:29:42
It’s as accurate (or consistent I guess) as the 5.56 stuff I paid double for. At least it is once I realized how important Loctite is on mounting screws…
zulthor
Member
Member

Joined: Jan 2011
USA PA, USA
Online
Posts: 792
Link To 100% (1)
Posted:

! –

Remington 870 Stocks Guns are only one hobby of mine, so I can use analogies to other ones. Getting your mind wrapped around ONLY ONE SCOPE is like saying you ONLY want one pickup for your guitars without trying any of them first. I’m not saying you need to purchase 15 different scopes for this [...]

Remington 870 Stocks

Guns are only one hobby of mine, so I can use analogies to other ones. Getting your mind wrapped around ONLY ONE SCOPE is like saying you ONLY want one pickup for your guitars without trying any of them first. I’m not saying you need to purchase 15 different scopes for this one rifle, but I’ve probably played well over 500 guitars in the last 10 years before I became as opinionated about pickups as I am now. I have shot and looked through about 200 scopes before I knew what I felt about each one. Have you taken the steps to handle some of these scopes we/I mention?

Aimpoint Comp ml2 – Sniper Resources Announces Joint Ventures on Two Nevada Gold Properties – Market WireVANCOUVER, BRITISH COLUMBIA–(Marketwire – Sept. 27, 2011) – Sniper Resources Ltd. (TSX VENTURE:SIP) (“Sniper Resources”) is pleased to announce that it has entered into joint venture agreements with Columbus Gold Corporation (TSX VENTURE:CGT) (“Columbus … DT Friend Capt. Josh [...]

Aimpoint Comp ml2 –

Sniper Resources Announces Joint Ventures on Two Nevada Gold Properties – Market Wire
VANCOUVER, BRITISH COLUMBIA–(Marketwire – Sept. 27, 2011) – Sniper Resources Ltd. (TSX VENTURE:SIP) (“Sniper Resources”) is pleased to announce that it has entered into joint venture agreements with Columbus Gold Corporation (TSX VENTURE:CGT) (“Columbus …

DT Friend Capt. Josh Powers Receives Purple Heart | Defense Tech
Defense Tech readers who followed our Afghan embed coverage back in May will remember Capt. Josh Powers, Angel Company Commander, 3rd Batt., 3-187 BCT. We

Sniper suspect’s trial delayed until March – Charleston Daily Mail
A judge has agreed to postpone until March the trial of Shawn Lester, who is accused of the 2003 sniper-style shootings of three county residents. Kanawha Circuit Judge Duke Bloom said a request from Kanawha Chief Public Defender George Castelle was …

Sniper Resources Enters Into JV Deal With Columbus Gold – RTT News
(RTTNews) – Sniper Resources Ltd. (SIP.V: News ) announced that it has entered into joint venture agreements with Columbus Gold Corporation (CGT.V: News ), whereby Sniper Resources can earn into two of Columbus Gold’s Nevada gold projects: Weepah and Laura …

Sniper Voice Actor’s Book Picks Up Plugs from Team Fortress 2 “Reviewers” – Kotaku.com
You may not be familiar with the name “John Patrick Lowrie.” You probably are familiar with the name “Sniper,” whom Lowrie voices in Team Fortress 2. He’s just published the novel Dancing With Eternity and, well, his friends are giving it some kind reviews …

U.S. SOLDIERS USING IRAQI GUNS | Defense Tech
G.I.s in Iraq have a new weapon of choice: Iraqi AK-47s. The soldiers (of the 4th Infantry Dvision) based around Baqouba (Iraq) are from an armor battalion,

‘Boardwalk Empire’: Meet the man behind mysterious sniper Richard Harrow – NJ.com
NEW YORK — As an actor, Jack Huston works wonders with just half a face, a gravelly, flat voice and cruel difficulty speaking. Fortunately, those afflictions aren’t his but instead are borne by Richard Harrow, the tragically disfigured World …

Marines in Spaaaaaace! | Defense Tech
After three years of being laughed out of meetings, the U.S. Marine Corps’ futuristic plans to deploy through space may finally be getting some traction,

Self-described shooting fan charged in Jacksonville sniper attacks – Florida Times-Union
Javascript is required to view this map. A Jacksonville man whose Facebook profile lists his favorite activities as drinking and “shooting things” has been charged in the shootings of a handful of vehicles on the Westside, including one that …

As always, thanks for looking Did a search and saw that there have been a couple of issues with Mesa Tactical gear. What’s the overall consensus of their products? Are there systematic problems with parts of their product line, or are these just sporadic problems that I’m reading about? I just ordered a side saddle [...]

SKS Accessories

SKS Accessories

Shooting Targets I’d rather have a Nikkor-Stirling. “If Tyranny and Oppression come to this land, it will be in the guise of fighting a foreign enemy” – James Madison Zhukov Does not play well with others Moderator Moderator Apr 2003 USA TX, USA Online Posts: 30546 : 0-0-0 : 5/25/2011 10:10:26 PEOPLE – quit posting [...]

Shooting Targets

I’d rather have a Nikkor-Stirling. “If Tyranny and Oppression come to this land, it will be in the guise of fighting a foreign enemy” – James Madison Zhukov Does not play well with others Moderator Moderator Apr 2003 USA TX, USA Online Posts: 30546 : 0-0-0 : 5/25/2011 10:10:26 PEOPLE – quit posting irrelevant crap as facts. This is a technical forum and while we all may “know” that NC Start sucks, I want the evidence to come from people who have actually owned one or have some kind of first-hand knowledge. Daddy loves you. Now go away. Originally By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape. silas79 Oct 2010 USA TX, USA 39 : 0-0-0 : 5/25/2011 10:24:16 I purchased one at a gun show thinking I was getting a decent Rifle Scope for a great price. I mounted it to my R15 .223, when I went to the range it would zero and shoot decent groups. But it would not hold zero never failed I shot pigs in the but and in the gut and completly missed some because it would loose zero so easily. I kept fighting it putting lok_tight on the screws and mounts and it never worked. I took it off and went with a camo nikon prostaff. The nikon has been great and I have now killed all the pigs I shoot at. The nc star was garbage and is still sitting at the bottom of my closet because I would feal guilty selling it to somone it is so bad! jsucraig Bronze Contributor Team Nov 2008 USA VA, USA Military 497 : 0-0-0 : 5/25/2011 11:37:04 : 5/25/2011 11:39:19 by jsucraig] I will admit when I bought my first AR-15 I was suckered into buying a Nc Star D4RGB 4 Reticle Holosight. I had been looking around for a small reflex sight. It was a toss up between a Barska, a Bushnell, and a Browning of this same type. They were all around the $60.00 price point. Nobody had them in stock. I hadn’t heard of Primary Arms yet and didn’t want something as big as the pre-X series EOTechs. I went to a semi-local Gun Show and saw everybody had these Nc Star 4 Reticle reflex sights. They were the same as the Barska, Bushnell, and Browning at the same price point.

Shooting Targets

Shooting Targets

Magpul ACS

http://www.adcofirearms.com/shopservices/shop_.cfm?code=5 Have you had this done to any of your rifles? We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. . jcrowl Bronze Contributor Team Member Joined: Jul 2007 [...]

http://www.adcofirearms.com/shopservices/shop_.cfm?code=5

Have you had this done to any of your rifles?

We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. .
jcrowl
Bronze Contributor
Team Member

Joined: Jul 2007
USA TX, USA
Member
Offline
Posts: 9762
Link To This Post
Blog User Blog
Media Media Collections 100% (93): 9/29/2011 7:48:40
I’ve had ADCO do lots of work on my rifles, just not that particular thing. I’ve never had a Colt with the sear block
hotbiggun42
Bronze Contributor
Team Member

Joined: Nov 2007
USA WA, USA
Member
Offline
Posts: 12376
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 9/29/2011 8:46:46
I will call ADCO. I was just wondering if you had it done what the procedure would be shipping a lower for repair or modification. Would I have to ship it and receive it through a FFL dealer ?

We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. .
Nichonator
Bronze Contributor
Team Member

Joined: Aug 2009
USA FL, USA
Member
Offline
Posts: 4237
Link To This Post
Blog User Blog
Media Media Collections 100% (2): 9/29/2011 8:48:10
The lower yes you would.

WE THE PEOPLE
hotbiggun42
Bronze Contributor
Team Member

Joined: Nov 2007
USA WA, USA
Member
Offline
Posts: 12379
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 9/29/2011 9:13:22
for repair? It is not like I am transferring ownership . Are you sure?

We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. .
PredatorWhacker
Bronze Contributor
Team Member

Joined: Dec 2004
USA WA, USA
Team Member
Offline
Posts: 1405
Link To This Post
Blog User Blog
Media Media Collections 100% (16): 9/29/2011 9:42:53
Unless this changed recently, you do not need to involve an FFL holder to ship rifles for repair and it can be sent back to the person who sent it.
hotbiggun42
Bronze Contributor
Team Member

Joined: Nov 2007
USA WA, USA
Member
Offline
Posts: 12386
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 9/29/2011 10:08:24
I will call ADCO tomorrow to verify the procedure and post it here. But it makes sense that I should not have to ship through a FFL. And I know gun laws rarely make sense

We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. .
epthunter
Member
Member

Joined: Mar 2006
USA MI, USA
Online
Posts: 107
Link To 100% (8): 9/29/2011 10:34:03
You do not have to ship through FFL. ADCO is a dealer/FFL. Have done this many times. It will come back to your house.
Garandboy
Bronze Contributor
Team Member

Joined: Apr 2003
USA NY, USA
Member
Offline
Posts: 3754
Link To This Post
Blog User Blog
Media Media Collections 100% (13): 9/29/2011 11:29:10
Originally Posted By epthunter:
You do not have to ship through FFL. ADCO is a dealer/FFL. Have done this many times. It will come back to your house.

This. ADCO is an FFL so they can receive the lower for repair. They can ship back to your home address. It is being returned, not transferred.

Handy little carbine. The M44 is a combination flash bang grenade, flame thrower, rifle and spear all in one.
TM109
Member
Member

Joined: Aug 2010
USA WA, USA
Offline
Posts: 1
Link To 0% (0): 10/16/2011 2:48:25 AM EDT
Specialized armament does it. Just got mine back and it looks great.
KZ45
Gold Contributor
Team Member

Joined: Apr 2002
USA CA, USA
Viva sacre mercenaire
Offline
Posts: 1439
Link To This Post
Blog User Blog
Media Media Collections 100% (10): 10/16/2011 4:27:03 AM EDT
Originally Posted By hotbiggun42:
I will call ADCO tomorrow to verify the procedure and post it here. But it makes sense that I should not have to ship through a FFL. And I know gun laws rarely make sense

I think you’ll have to email them.

Rick_A
Member
Member

Joined: Mar 2008
USA FL, USA
Offline
Posts: 1078
Link To 0% (0): 10/16/2011 6:27:59 AM EDT
If you’re feeling brave just cutting the protruding metal off the top should do the trick.

VLODPG
Bronze Contributor
Team Member

Joined: Aug 2004
USA CT, USA
Member
Offline
Posts: 5974
Link To This Post
Blog User Blog
Media Media Collections 0% (0): 10/16/2011 6:32:11 AM EDT
Originally Posted By hotbiggun42:
I will call ADCO. I was just wondering if you had it done what the procedure would be shipping a lower for repair or modification. Would I have to ship it and receive it through a FFL dealer ?

No, You can ship it direct to them & they can send it back to you!

But a more important question, unless there is something wrong with the BCG, why bother with removing it?

pun
Member
Member

Joined: Mar 2001
USA USA
Offline
Posts: 2060
Link To 100% (41): 10/16/2011 12:21:15
I have a late model pre-ban lower.Sent it to M60joe.com to take out the block then he plugged and recut my hammer/trigger pin holes so I can use standard .154 parts and pins.Removing the block was $80 that included shipping and about $400 to have the lower holes redone and the lower refinished a nice matte black.I got the lower stripped for $250 so now I have a $1250 invested in preban with no block and normal size holes..he does great work.Adco does too but I only use them for barrel work.
hotbiggun42
Bronze Contributor
Team Member

Joined: Nov 2007
USA WA, USA
Member
Offline
Posts: 12594
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 10/16/2011 12:26:17
Originally Posted By VLODPG:
Originally Posted By hotbiggun42:
I will call ADCO. I was just wondering if you had it done what the procedure would be shipping a lower for repair or modification. Would I have to ship it and receive it through a FFL dealer ?

No, You can ship it direct to them & they can send it back to you!

But a more important question, unless there is something wrong with the BCG, why bother with removing it?

What if the carrier breaks? Colts modification pretty much made the BCG proprietary. If I needed to replace the BCG I would then have to send off for repair . I thought if I de sporterized it now I could still use the neutered BCG until it needs to be replaced.

We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. .
Stottman
Member
Member

Joined: Jan 2001
USA TX, USA
Offline
Posts: 4025
Link To 100% (45): 10/16/2011 1:09:01
[: 10/16/2011 1:09:34 by Stottman]
Originally Posted By hotbiggun42:
Originally Posted By VLODPG:
Originally Posted By hotbiggun42:
I will call ADCO. I was just wondering if you had it done what the procedure would be shipping a lower for repair or modification. Would I have to ship it and receive it through a FFL dealer ?

No, You can ship it direct to them & they can send it back to you!

But a more important question, unless there is something wrong with the BCG, why bother with removing it?

What if the carrier breaks? Colts modification pretty much made the BCG proprietary. If I needed to replace the BCG I would then have to send off for repair . I thought if I de sporterized it now I could still use the neutered BCG until it needs to be replaced.

How often do carriers break? Even in hard use Military rifles. Your bolt will break well before then.
Plus, its not like one cannot find a Colt “sporter” carrier out there…

Seems to me (Almost all of my ARs have the block) that the cost of having the block taken out does not outweigh the small gamble of having to replace the bolt carrier.

hotbiggun42
Bronze Contributor
Team Member

Joined: Nov 2007
USA WA, USA
Member
Offline
Posts: 12595
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 10/16/2011 1:19:41
$100 is too much?

We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. .
john575
Bronze Contributor
Team Member

Joined: Mar 2005
USA IA, USA
you can’t take the sky from me…..
Offline
Posts: 10300
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 10/16/2011 1:26:04
I dropped a FA carrier in mine and it seemed to cycle fine, I will have to take a closer look.

“All that is required for evil to prevail is for good men to do nothing.” – EB
hotbiggun42
Bronze Contributor
Team Member

Joined: Nov 2007
USA WA, USA
Member
Offline
Posts: 12596
Link To This Post
Blog User Blog
Media Media Collections 100% (1): 10/16/2011 1:36:52
If there is a seer block installed you would know it. It would lock up your rifle and you would be unable to even pull the CH back. That is the case with my rifle anyway.

We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. .
Stottman
Member
Member

Joined: Jan 2001
USA TX, USA
Offline
Posts: 4027
Link To 100% (45): 10/16/2011 1:53:23
Originally Posted By hotbiggun42:
$100 is too much?

Yes.

$100 up front (plus shipping; Not cheap) vs. possible gamble of a $100 carrier?
TM109
Member
Member

Joined: Aug 2010
USA WA, USA
Offline
Posts: 2
Link To 0% (0)

r Email User Reply Quote Report pappy177 Bronze Contributor Joined: Jul 2011 FL, Posts: 1183 Link To This Post Blog User Blog Media Media Collections EE Feedback 100% (3) Posted: 10/6/2011 9:29:53 AM EST I don’t think slam fires are a problem on properly maintained SKS Rifle Stocks rifles otherwise everyone would be selling springs [...]

r Email User Reply Quote Report pappy177 Bronze Contributor Joined: Jul 2011 FL, Posts: 1183 Link To This Post Blog User Blog Media Media Collections EE Feedback 100% (3) Posted: 10/6/2011 9:29:53 AM EST I don’t think slam fires are a problem on properly maintained SKS Rifle Stocks rifles otherwise everyone would be selling springs for them.

!

aimpoint 3x ) and am seeking ammo advice as well as any general M1A Scope Mounts advice. BigGeorgeC 3/8/2007 4:13:20 PM To the best of my knowledge unlike .223/5.56 chambered weapons, 308/7.62 are the same. My M1A Scope Mounts & FAL shoots factory 308 just fine when I’m not blasting surplus 7.62. boricua9mm 3/8/2007 4:22:35 [...]

aimpoint 3x
) and am seeking ammo advice as well as any general M1A Scope Mounts advice. BigGeorgeC

3/8/2007 4:13:20 PM To the best of my knowledge unlike .223/5.56 chambered weapons, 308/7.62 are the same. My M1A Scope Mounts & FAL shoots factory 308 just fine when I’m not blasting surplus 7.62. boricua9mm

3/8/2007 4:22:35 PM My understanding of it is that commercial .308 loads are actually hotter than their military 7.62 counterpart.SpringfieldArmory Inc. rifles are headspaced to fire either cartridge safely. Red_Label

3/8/2007 4:23:25 PM ten-ring: What is the exact difference. The case specs are identical per my Hornaday reloading book.It does show different loading’s and bullet weight’s. I saw mentioned somewhere that one could be shot in the other but not vice versa. I will soon be purchasing an M1A Scope Mounts (my dream rifle!

Eotech -
Mesa Tactical

Eotech -


! –

! –

H2O_MAN 2/22/2006 8:07:33 PM Rodent: The round was designed for a longer barrel. Why trade velocity for noise and flash? – Magpul MOE | Aimpoint & Eotech | Page 5 – Ruger 10/22 Guns, AR-15 …Aimpoint Comp ml2 – Bayonet Lug Adapter – Ar-15 Stocks — Nightforce Scopes Aimpoint; Eotech; Trijicon; Airsoft Pistols; Match Tools; [...]

H2O_MAN 2/22/2006 8:07:33 PM Rodent: The round was designed for a longer barrel. Why trade velocity for noise and flash? –

Magpul MOE | Aimpoint & Eotech | Page 5 – Ruger 10/22 Guns, AR-15 …
Aimpoint Comp ml2 – Bayonet Lug Adapter – Ar-15 Stocks — Nightforce Scopes Aimpoint; Eotech; Trijicon; Airsoft Pistols; Match Tools; Pistol Courses; SKS Guns …

User Info Joined: Nov 2000 OH, Offline Posts: 7912 Link To This Post EE Feedback 100% (3) Posted: 10/9/2011 9:56:59 AM EST I have at least a few thond rounds through several different SKS Rifle Stocks rifles and have never experienced a slam fire. Just realize that the possibility exists and maintain proper muzzle discipline and it should never be… (more…)

User Info

Joined: Nov 2000
OH,
Offline
Posts: 7912
Link To This Post
EE Feedback 100% (3)
Posted: 10/9/2011 9:56:59 AM EST
I have at least a few thond rounds through several different SKS Rifle Stocks rifles and have never experienced a slam fire.

Just realize that the possibility exists and maintain proper muzzle discipline and it should never be a problem.

Keep and eye out for them on gun broker also.
Blog User Blog
Media Media Collections
EE Feedback 0% (0)
Posted: 10/24/2011 1:52:02 PM EST
Ordered mine about a year ago and am still waiting on it. The company, Shernic Gun Works, said that they are behing but still shipping. I’m waiting patiently.

–
Remington 870 Stocks

War profits. Ultrastealth [Member] 8/4/2011 2:38:10 PM LaRue Tactical is just good people making great products who also offer great service for the customer. ceverett 8/4/2011 2:39:52 PM I bought a $115 Scope Mount and put a $90 flashlight in it. – No product-related CS experience, but they did send me a free hat when I inquired about where to… (more…)

War profits.

Ultrastealth [Member]
8/4/2011 2:38:10 PM
LaRue Tactical is just good people making great products who also offer great service for the customer.
ceverett
8/4/2011 2:39:52 PM
I bought a $115 Scope Mount and put a $90 flashlight in it.
–

No product-related CS experience, but they did send me a free hat when I inquired about where to buy one. Other: Unless you absolutely must have a 2MOA dot, go for the Micro. They’re so light you will hardly notice you have an optic mounted. Originally posted by Aimless My Aimpoint has more than half a decade on it and many, many thousands of rounds. Best optic I have ever owned. Mine is an ML (or Aimpoint ML2 .html”>Aimpoint Aimpoint ML2 ?) anyone the lower priced one that is not nightvision compatible. Originally posted by Postal0311 Picked up a T1 and loved it. Highly recommend it. No problems or issues. At least 1000 rounds fired on various uppers. Only thing is that it is so small that I keep getting fingerprints on the lenses because there is soo little to hold on too when putting it on and taking it off. Got a Comp M in trade. It was very dim, hard to see in the bright FL sunshine, so I got rid of it. I do not recommend the older Comp M.

aimpoint ml2 –

aimpoint ml2 –

ATI stocks Mosin Nagant | Magpul MOE – Ruger 10/22 Guns, AR-15 …
Aimpoint; AK-47 Accessories; AK-47 Furniture; AK-47 Handguards; AK-47 Mounts; AK47 Stocks; AmeriGlo Night Sight; AR-15 Accessories; AR-15 Bipods; AR-15 Carry Handles.

Ruger 10/22 Accessories | Magpul MOE
Pingback:Gun accessories for you AR-15 and 10/22 » Blog Archive …

Magpul MOE | Aimpoint & Eotech | Page 2 – Ruger 10/22 Guns, AR-15 …
512 eotech – Military and Law Enforcement Discounts – MSP: AR-15 Accessories … Bushnell Elite 6500 2.5-16x 42 Rifle Scope Code: 100-B-652164T Price: $831.99.

Sturm,
Sturm,

Shooting Targets –

Shooting Targets –

All, I recently purchased an Benelli AccessoriesM2 Tactical for home defense and to use at 3 gun matches. One of the first things I would like to do is increase the magazine capacity from 5 to 7/8 with an extension tube… but I am confused about the 922r. I searched and could not find any [...]

All, I recently purchased an Benelli AccessoriesM2 Tactical for home defense and to use at 3 gun matches. One of the first things I would like to do is increase the magazine capacity from 5 to 7/8 with an extension tube… but I am confused about the 922r. I searched and could not find any threads that specifically mention what items need to be replaced on the gun to bring a Benelli AccessoriesM2 back into compliance.

–
Surefire

ar 15 scopes – This Mark is a HELL of a buisness man. Urimaginaryfrnd 8/4/2011 2:31:30 PM La Rue is just a GREAT Company who treats their customers the way they would like to be treated if they were the … Continue reading →

Shooting Targets -

Defense Review - Chinese Electromagnetic Pulse (EMP) and High ...
Chinese Electromagnetic Pulse (EMP) and High-Powered Microwave (HPM) Weapons vs. U.S. Navy Aircraft Carrier Battle Groups: Can the U.S. Military Effectively Counter ...

Defense Review - IDF’s New Camouflaged Robotic Snake (“Robot ...
IDF’s New Camouflaged Robotic Snake (“Robot Snake”) Slithers into Combat: Reconnaissance Robots Get Sneaky…Real Sneaky.

Defense Review - The Big M4 Myth: “Fouling caused by the ...
The Big M4 Myth: “Fouling caused by the direct impingement gas system makes the M4/M4A1 Carbine unreliable.”

Defense Review - Springfield Armory XDm-45ACP and XD(M)-9mm 5.25 ...
The Beretta Nano isn't the new tactical-format pistol to come down the pike, lately. Springfield Armory recently announced the release of the long-slide Springfield ...

Defense Review - M4/M4A1 Carbine Reliability Issues: Why They ...
I fired 15,000 rounds through a semi-automatic M4/M4A1-type direct-gas-impingement (DGI) carbine in 31 weeks without a single malfunction attributable to anything ...

Defense Review - Grip Pod Vertical Foregrip/Bipod and Weapon ...
Grip Pod Vertical Foregrip/Bipod and Weapon Stabilizer: Is it a Viable Option for Your Tactical Carbine/Rifle?

U.S. Military Infrared Target Pointer/Illuminator/Aiming Laser, AN ...
U.S. Military Infrared Target Pointer/Illuminator/Aiming Laser, AN/PEQ-2 & 2A NSN: 5855-01-422-5253 & NSN: 5855-01-447-8992 The Infrared Target Pointer/Illuminator ...

Defense Review -
News and Information On The Latest Military Defense, Law Enforcement, And Tactical Technologies from Around the World

Defense Review - M4/M4A1 Carbine Reliability Issues Part II ...
When a weapon malfunctions, we often hear "it jammed" or some such non-descript statement that gives us no more information than what we already witnessed–your ...

*I know if I would have bought a domestic shotty I would not have to worry about this. Homeinvader 2/22/2011 8:08:35 PM Adding an extended tube is something that most shooters just do without too much consideration for 922r. Go to any 3-Gun match and talk to the Benelli M2 Accessories shooters, you'll hear a lot "whatever" comments. If you want to be by the book, there are not many options but here are some parts to look at: US made mag follower (probably the easiest to acquire) Meas Tactical Urbino stock (with pistol grip) Mesa Tactical is making new fire control parts for the M4, but not for the Benelli M2 Accessories as far as I know. The M4 is more 922r intensive than the M1 or Benelli M2 Accessories with the availability and desire for the collapsible stock. Stiffy 2/23/2011 1:19:42 AM Carrier comp sells titanium mag tubes and gives you the follower for free. That is two US made parts. Then you could buy the Surefire forend or side armor rail. MDracer76 2/23/2011 10:54:40 PM Thanks for the advice all..

-
Red Dot Sights

I have both and they each serve a purpose. I love the M1A Accessories SOCOM for it's excellent balance, relatively light recoil (superb muzzle brake), and phenomenal reliability and durability. Understand that I consider one malfunction in 1000 rounds a problem. The heritage of the M14 is an intangible of value for me as well. I gave up trying to put a conventional scope on the M1A Accessories and just went with a scout scope, irons, or red-dots. Stock M1As are plenty accurate as battle rifles, but you won't take one to a match with out bedding the action. The .308 AR is a lot of fun, and so far reliability is actually great. I hope it does better than some of my .223 rifles when it gets dirty. The AR doesn't require bedding and is great to scope and accessorize. ARs are expensive metal Lego sets for men, and we should just admit that up front. I won't use the cliche of telling you to get both, but that's what I did. For their individual merits, I think the M1A Accessories and AR-10-pattern rifle are each at the top of their given genre. You'll get great AR advice here and you'll get great M1A Accessories advice at www.M14forum.com. If you just want a neat gun to blast, get either one. You won't be disappointed. Best regards, JR wow, thanks a lot, man very very helpful Slash [Dealer] 5/1/2007 1:20:38 PM For me it is a simple decision. If you intend to install optics, go with the AR platform. If you are going to use irons exclusively, the M1A Accessories is a great choice. 53vortec

5/1/2007 1:25:49 PM Originally Posted By Slash: For me it is a simple decision. If you intend to install optics, go with the AR platform. If you are going to use irons exclusively, the M1A Accessories is a great choice. Solid advice. Additionally if you're trying to decide between a Springfield Armory M1A Accessories and a Armalite AR10, I'd reccomend the AR10. m4hk33

5/1/2007 1:48:52 PM while i had both i kept the AR10 and it is my favorite rifle to shoot, not taking away anything from the M1A, but for 99 percent of the SHTF situations(in the USA) the AR10 is more then capable enough to get you out of harms way or taking any game that pokes its head out. its easier to scope and maintains higher levels of accuracy easier then the M1A Accessories maybe if i lived in columbia or somwhere eles in latin america, i would go with the M1A Accessories cujet

5/1/2007 6:33:40 PM Simple question. Do you want iron sights? -

Injection-molded in glass-filled nylon, the stocks feature a “tactical”12� inch length of pull (LoP) for enhanced weapon control, especially with body armor; optional field-adjustable cheek riser to provide improved cheek weld when used with optics; optional Limbsaver� butt pad for greater shooting comfort, especially during long training or certification courses; shock-absorbing rubber grip sleeve to reduce shooter fatigue; and a variety of standard and proprietary sling mounting options.



The Urbino Tactical Stock takes many of its design cues from the Benelli Accessoriesfactory tactical stocks. “But the Benelli Accessoriesstock was a point of departure for us,” says Mitch Barrie, president of Mesa Tactical and the primary developer of the Urbino Tactical Stock. “We thought it was the most comfortable stock for tactical shotguns, but like all factory stocks it was too long for tactical applications. Our law enforcement and military customers urgently needed a stock with a reduced LoP. They were also clamoring for a stock for the Benelli AccessoriesM4, which is beginning to see wide adoption by law enforcement special weapons teams.”

-

If not, who's the maker?

H2O_MAN

12/20/2007 3:36:27 PM Originally Posted By Southern_Raider: For purposes of this comparison, let's say I want to hit an 18" target at 800yds (2.25MOA) What would you do? -

Aimpoint Compm2

The Aimpoint Compm2, also known as the M68/CCO (when used by U.S. forces), is the standard sight for the U.S. Army, the U.S. Air Force, and the armed forces of many NATO countries.

Designed for extreme conditions - submersible to 25 meters

The Aimpoint Compm2 is ready for use around the clock due to its compatibility with all generations of night vision devices (NVD)

When the Aimpoint Scopes Compm2 was released, it became the benchmark against which all other combat optics are measured. While primarily utilized by armed forces, the CompM2 is also available to hunters and sport shooters who want a professional-grade sight.

Holds up under the roughest physical handling and can withstand the most severe weather conditions and temperatures

Completely submersible and will withstand pressures up to 2.5 atmospheres allowing it to be taken up to 80 feet (25 meters) under water.

Mossberg 500 Accessories -
aimpoint 3x

Shooting Targets -
Red Dot Sights

AR-15 Stock -
Q: How old should my child be before I have them start wearing hearing protection protection?

It worked great. I normally wear standard hearing protection protection devices to protect my damaged ears. Your product allowed me to hear again and still protect my ears. I shot 2 bucks this past season. Thank you for a great product.! - S. TOLLAKSON Tom Lee Cerbo Loves the Advantages of Pro Ears Protection and Amplification I've gone from an uncertified USPSA shooter to my current ranking of Master Class using [Pro-Ears]. Pro Ears gives me unlimited advantages on my reaction time to the start signal. They helped me improve my draw from 1.20 seconds to .95 seconds. I love my Pro-Ears. - T.L. CERBO Thank You!!! I want to thank you for your excellent customer service and response to my request. American business companies should learn how to take care of their customers like you do! Thank You!!! - H. HARTLEY Not only do you have a great product, but you stand behind it. I would like to thank the person responsible for the fast replacement of the mic covers for my sporting clay muffs. I needed them for competition this weekend and I received the covers today in the mail. Not only do you have a great product, but you stand behind it. - P. TRONCALE I really appreciate the American Made commitment you have. I bought these based on prior Pro-Ears purchases. Each set that I have bought has been better than the last. I buy them for friends as gifts (my originals are still going strong). I really appreciate the American Made commitment you have; it is my number one purchasing criteria. Your warranty is top notch (I've had to use it once) and your "ears" are the best in the business. I wear them proudly on the range and in training. - B. VOSS I'm very satisfied and impressed with their (Pro Ears) product. There are a number of companies that make electronic ear protection with amplification. The company I chose was Ridgeline, Inc. because their specifications were superior and their experience in various applications is extensive. I'm very satisfied and impressed with their product. - N. ANTON, LETTER TO THE EDITOR OF "TINNITUS TODAY" "they became the "must-have" of the weekend!" Thank you so much for the two pairs of Pro-Ears Predators. [We had the Predators] in time for our Stuntwomen's Association of Motion Pictures/NSSF Tactical2Practical II shooting seminar we held in November for the elite film industry stuntpeople and stunt coordinators. Everyone who attended got a chance to try them and they became the "must-have" of the weekend! - K. ROWE AND E. ALEXANDER, STUNTWOMEN'S ASSOCIATION OF MOTION PICTURES, INC CO-CHAIRS "Nothing else lives up to your standards." I've tried Peltors...Dillons and others, but prefer my Pro Ears by a long margin. As a firearms safety instructor the ability to hear, at all times, is paramount. Your product is the only one that does not "blank out" momentarily during loud noises. I've been using them for 4 years or so, and have no intention of replacing them with another product. Nothing else lives up to your standards. -P. Murray Customer Feedback "I won a set of Pro Mag Gold muffs at the Rocky Mountain 300 prize table last weekend. I just wanted to let you know how much I appreciate Pro Ears sponsorship of our match! We had a great time despite the severe thunderstorm and tornado warnings on Saturday :) And of course the prize table is ALWAYS a lot of fun! I love that I can plug my Pro Mags into my ipod....way too cool.....and they are very comfortable! Again, thank you so very much! We could not play this awesome game without great sponsors like Pro-Ears!" - Shelly, A Pro Ears ear muffs user It was a pleasure dealing with you in my purchase of my second pair of Pro-Ears. Your professionalism, customer service and product knowledge is the best. Thank you. It also gives me a great deal of satisfaction to " buy American". I only wish other companies would realize that most customers , especially older ones , are willing to find and buy American made products. Maybe our market is small, but we are out there! My third trip to S. Africa is this June and I will send you some photos that showcase my new Pro-Ears. Thanks again. Norm Klopfenstein About Honeywell
Honeywell International (www.honeywell.com) is a Fortune 100 diversified technology and manufacturing leader, serving customers worldwide with aerospace products and services; control technologies for buildings, homes and industry; automotive products; turbochargers; and specialty materials. Based in Morris Township, N.J., Honeywell�s shares are traded on the New York, London, and Chicago Stock Exchanges.� For more news and information on Honeywell, please visit www.honeywellnow.com.

-

Never had one with my SKS Rifle Stocks or my ar's with no springs.

"Those who hammer their guns into plows, will plow for those who do not." Thomas Jefferson"
User Info
IM User
Email User
Reply
Quote
Report
scatterbrains


Joined:

-

I'm saying that is the way it is done in the military. Match and specialized sniper/long range ammunition is far from underloaded. There are specialized gas plug screws made fro the M14 Scope Mounts type rifle that allow a wide variety of ammunition to be utilized so there is no drawback to choosing one over an AR10 type platform for civilian use and again, a properly manufactured and heat treated modern M14 Scope Mounts type receiver is no less reliable than a modern manufactured AR10 two piece receiver system. Price wise, there is no advantage of one rifle over the other as comparable rifles of both systems are priced comparably once a scope mounting system is added to the M14 Scope Mounts type rifle and optics with rings are added to both. I will concede in the civilian arena, the AR10 allows the owner to more readily change barrels with less trouble than changing the barrel on an M14 Scope Mounts type rifle but doing so on a regular basis will place undue wear and strain on the AR10 upper receiver so this trait really only provides the individual builder the option of creating a specialized rifle built to his specifications and doing most or all of the work him/herself.. There are plenty of very good M14 Scope Mounts gunsmiths working in the civilian sector and they will do barrel changes at reasonable rates if it is determined to be necessary. Once the barrel is installed on the receiver, ALL of the rest of the work necessary to build a rifle can be accomplished on the M14 Scope Mounts type rifle just as easily as the AR10 type rifle by the individual builder so very little advantage goes to the AR10 verses the M14 Scope Mounts in this aspect. I have a M14 Scope Mounts-EBR myself so I am not hating on the system. Just pointing out how the AR-10 is cheap and easy to work on. If it is easy for me, then it will be easy for the Army. One thing I learned is availability of USGI M14 Scope Mounts parts are rare. I can't even pick up a M14 Scope Mounts USGI bolt anymore at a decent price. $250 for a stripped USGI Bolt seems to be the going rate now (and another $75 to lap and headspace). Again, if it is rare for me, it's probably rare for the Military too. Supply has to be running about dry by now even with all those parts we had in stock. A complete ready to do AR-10 bolt is only $115 and I don't have to pay anyone to install it. A cheap non-usgi M1A is now about $2200 with a Sage stock and no scope mount. A Forged AR-10 with Chrome Line Barrel is $1500 with FF rails, CTR stock, and scope mount. I am no rocket scientist, but I can swap everything on my AR10 myself. I am not a big fan of "I must take my car to the shop to change oil". To me swapping a bolt or barrel for my AR10 is free. For a M14 Scope Mounts it's $75 each time. Now SR-25's are dam expensive, and I have no idea why as it is really not that much different than an AR-10. Maybe the US Military will be wise like the Canadian Military and pick up AR-10's?

Most ear muffs, unless specifically designed for youths, are too large for smaller heads and ears. Pro-Ears are not designed for very small children as the muffs may be too large or the headband may not compress sufficiently. Our Predator cup is the smallest Pro-Ears cup.

-

Will the bayonet lug accept standard M-7, and M-9 bayonets?, what bayonet is normaly issued with the 590?....

Are there any other accachments that will fit on the bayonet lug?....

Whats the ratio between 590's, and other millitary tactical shotguns currently in use, which is more common?....

What shells does the millitary use?....

As you may have already guessed I felt my collection was in need of a millitary tactical shotgun so I went out, and bought one, now I'm flush with questions....
G22
8/13/2006 2:12:35 AM EST
Sorry, I be having no answers... but I thought it was the 590A1 that they used and not the 590?
shogun187
8/13/2006 2:15:07 AM EST
It is the A1 model, with the heavy barrel.
guardian855
8/13/2006 2:27:54 AM EST
I didn't have a Mossberg 500 Accessories 590 in Iraq, we carried old Winchester 1200 Defenders (wooden stock, 5 round capacity, heat shield)

But the one part of the question I can answer is we carried Federal 00 buck shells.

-
The Mesa Tactical, not so as the Endine Buffer is the recoil system and the weapon has to be shouldered. SpecOps works when fired correctly and is worth the cost. Mesa Tactical works and is worth the cost.

Nice rifle but put her in some nice wood for christsakes. You spent all that money and time and effort on the steel. That rifle is screaming for a presentation grade piece of figured walnut. OP, This guy is right when he says have a fat wallet and lots of time. Also, unless you have experience and tools for the build, be damn sure you pick a decent smith. I messed up my share of gunparts in my career and I'm a toolmaker. You don't want to mess up expensive/hard to come by stuff. We hve our buddy B Clinton to thank for the scarcity of M14 Accessoriesstuff. He gave it all away. Okay, So I know some of the history but perhaps you fella's and Master Differant can fill in the blanks. I'll be getting my first semiauto .308 battle rifle soon and I've narrowed my choice down too these two fine rifles. Springfield Inc M1A1 standard or DSA SA58. Why was the M14 Accessorieschosen over the FAL by the Army? -

Mounting Solutions Plus (MSP): Store Map
a.r.m.s. #1 h&k g-3/mp-5/91 scope mount: a.r.m.s. #10 acog channel mount / thumb nuts, for trijicon acog: a.r.m.s. #11 aquila adaptor night vision scope mount


I picked up mine for under $380 about a month ago. All matching. Si vis pacem, para bellum User Info IM User Email User Reply Quote Report Colddeadhands61 Joined: Mar 2010 FL, Offline Posts: 307 Link To This Post EE Feedback 100% (15) Posted: 10/28/2011 3:11:32 PM EST Originally Posted By Thunderchicken21: Russian all the … Continue reading →

I picked up mine for under $380 about a month ago. All matching.

Si vis pacem, para bellum
User Info
IM User
Email User
Reply
Quote
Report
Colddeadhands61

Joined: Mar 2010
FL,
Offline
Posts: 307
Link To This Post
EE Feedback 100% (15)
Posted: 10/28/2011 3:11:32 PM EST
Originally Posted By Thunderchicken21:
Russian all the way. I picked up mine for under $380 about a month ago. All matching.

http://inlinethumb61.webshots.com/48380/2896361750084397041S600x600Q85.jpg

You sir, stole that for $380. Beautiful rifle, uh I mean carbine. Enjoy it……..

User Info
IM User
Email User
Reply
Quote
Report
aeroc123

Joined: Nov 2008
PA,
Offline
Posts: 180
Link To This Post
EE Feedback 0% (0)
Posted: 10/28/2011 3:55:02 PM EST
i have a yugo m59/66 and it is a very good sks…as sks’s go, you need to try to get one unissued etc. The main problem with surplus 59/66 sks’s is the use of corrosive ammo in the gas system causing pitting and leakage. If you watch and get a unissued they run just fine.
User Info
IM User
Email User
Reply
Quote
Report
foreman2000
Bronze Contributor

Joined: Feb 2009
GA,

Offline
Posts: 2880
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (2)
Posted: 10/31/2011 1:00:18 AM EST
I wont put more than 300.00 in one and to be honest that is too much
User Info
IM User
Email User
Reply
Quote
Report
slug36

Joined: Jan 2010
TX,
OfflineI was wondering have we had or do we have an SKS Rifle Stocks thread going?

Mounting Solutions Plus
Mounting Solutions Plus: Scope Mounts, Scope Rings & AR-15 Accessories. MSP is both a manufacturer of high quality AR-15 & other firearm accessories and a distributor ...

MSP: Tactical Scope Mounts
Tactical Quality Scope Mounts. Mounting Solutions Plus (MSP) is a distributor of ARMS Scope mounts, PRI, AIMPOINT Comp Scopes and other high quality shooting products ...

Mounting Solutions Plus (MSP): A.R.M.S. Mounts
ARMS #29 AN PVS-14 NIGHT VISION SCOPE MOUNT Price: $248.00 Sold Out

Mounting Solutions Plus - Local Business - Miami, FL | Facebook
Mounting Solutions Plus - MSP is both a manufacturer of high quality firearm accessories and a distributor of respected firearms accessories and related products. We ...

Mounting Solutions Plus (MSP) Links
Mounting Solutions Plus, a distributor of A.R.M.S., PRI Mounts (Precision Reflex), AIPMPOINT and other tactical quality shooting supplies & gun accessories for the ...


I think the Aimpoint ML3 is better armored too. If you go scuba diving with your optics, get an M. Msokol135/28/2008 11:07:06 PM Originally Posted By newbie_nick: What is the difference between the COMPC3 and the Aimpoint ML3 ? I’ve searched and can’t find anything on it. Compc3 is civilian version…unless you go scuba diving … Continue reading →

I think the Aimpoint ML3 is better armored too. If you go scuba diving with your optics, get an M. Msokol135/28/2008 11:07:06 PM Originally Posted By newbie_nick: What is the difference between the COMPC3 and the Aimpoint ML3 ? I’ve searched and can’t find anything on it. Compc3 is civilian version…unless you go scuba diving with your gun it is more than sufficient. Bubba12gauge5/29/2008 12:15:53 AM No contest Aimpoint is way more durable and reliable.

I want an SKS Rifle Stocks that is not a norinco and one that will shoot when I want it to I just dumped my shitty norinco off for 200.00
What should I look for and what should I be expecting to spend ?
User Info
IM User
Email User
Reply
Quote
Report
dwinecof
Bronze Contributor

Joined: Feb 2009
GA,
NRAMilitary

Offline
Posts: 1454
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 0% (0)
Posted: 10/28/2011 6:40:24 AM EST
[Last Edit: 10/28/2011 6:40:40 AM EST by dwinecof]
There are recently imported Yugo’s out there for around $279. Knowing how cheap they used to be I balk at the price but I’ve never heard anything bad about them.

ETA: Just found VG Yugo 59/66s at Samco for $259 and Excellent for $299. SOG may have some on their site, I don’t have time to look right now.

Master Sergeant Steven E. Auchman , F, April 21,1967 – November 9, 2004, Mosul, Iraq

MSgt, F, Retired
5th Mob “Let’s Go”
GeorgiaCarry.Org
NRA Life
Tennesee Squire
User Info
IM User
Email User
Reply
Quote
Report
Colddeadhands61

Joined: Mar 2010
FL,
Offline
Posts: 306
Link To This Post
EE Feedback 100% (15)
Posted: 10/28/2011 7:18:37 AM EST
I’ve had 3 different SKS’s. A type 56 Norinco, a 59/66 Yugo, and a type 45 Russian (Tula). The only one worth anything was the Russian. I sold the other 2 and kept the “52 Tula. Russian SKS’s are in the $450 – $600 range here in SW Florida. At the last fun show, July ????, a guy had a ’54 Tula for $450 that was pretty nice.
My Russian goes bang every time. It’s reliable and accurate. Save your money and get a Russian. You won’t be sorry.
User Info
IM User
Email User
Reply
Quote
Report
fmjron

Joined: Dec 2004
MI,
Offline
Posts: 1080
Link To This Post
EE Feedback 0% (0)
Posted: 10/28/2011 8:38:46 AM EST
Originally Posted By Colddeadhands61:
I’ve had 3 different SKS’s. A type 56 Norinco, a 59/66 Yugo, and a type 45 Russian (Tula). The only one worth anything was the Russian. I sold the other 2 and kept the “52 Tula. Russian SKS’s are in the $450 – $600 range here in SW Florida. At the last fun show, July ????, a guy had a ’54 Tula for $450 that was pretty nice.
My Russian goes bang every time. It’s reliable and accurate. Save your money and get a Russian. You won’t be sorry.

wow…450$ to 600$ i would buy an ak before i ever spent that much for an sks.
User Info
IM User
Email User
Reply
Quote
Report
Sajer
Bronze Contributor

Joined: Jul 2002
IN,

Offline
Posts: 2493
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (3)
Posted: 10/28/2011 9:28:54 AM EST
The Yugo 56/66 model is ok and right now Cabelas has a bunch on sale for $199.00, but I have never been a fan of them. Now if you can score a Yugo 59, they are sweet shooters but may cost you a little more. The Russian and Romanian I think are some of the nicest out there and I just put a Russian on layaway for $319, which is a decent price, but not great. I bought it to replace my other Russian that has a mismatched mag/floorplate.

Typical russians in the midwest are going in the $400 range with Romainians in the high 3′s.

Check the equipment exchange often for deals as Christmas is coming and people will start unloading some stuff.
User Info

Joined: Nov 2000
OH,
Offline
Posts: 8033
Link To This Post
EE Feedback 100% (3)
Posted: 10/28/2011 10:03:49 AM EST
Originally Posted By dwinecof:
There are recently imported Yugo’s out there for around $279. Knowing how cheap they used to be I balk at the price but I’ve never heard anything bad about them.

ETA: Just found VG Yugo 59/66s at Samco for $259 and Excellent for $299. SOG may have some on their site, I don’t have time to look right now.

I had a hell of a time with mine, until I got all of the gunk out of the gas system.

After that, NOTHING stops it. It’s also reasonably accurate, for what it is. I’m perfectly happy with it.

While I’d love to buy more at prices from several years back, $250-300 is still a pretty good deal for what you’re getting. A reliable, 10 round, semi-auto rifle that is built like a tank.

User Info
IM User
Email User
Reply
Quote
Report
Thunderchicken21
Bronze Contributor

Joined: Jan 2009
OH,

Offline
Posts: 497
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (20)
Posted: 10/28/2011 10:03:55 AM EST
Russian all the way.

Thank you for making a superior product made in the U.S.A. with hearing protection conservation and communication in one. Sincerely Ron Swain Industrial Automation Maintenance Technician US Conceal and Carry Reviews Pro Ears Gold Click here to read the review from US Conceal and Carry Fast Repairs Just wanted to drop you guys a line and say thanks for repairing my pro-ears promptly. They work great and fit better than ever. Nice job. Sincerely, Robert Domer Anne Vinnola, Shooter/Hunter, mother and wife, Explains Why You Should Own Pro Ears www.womenhunters.com/proears-gold-review-vinnola.html Anne Vinnola sighting in wearing Pro Ears Pro Ears Predator Put To The Test http://www.bluewaterbiggame.com/hunting_field_tests/rl_predator_300.cfm Pro Ears are a Great Help to Young Competitor Chris Saylor Quality electronics Dear Sir, since I have received my order, I wear a pair of Pro Mag Gold series every Sundays at the shooting range. This place is very busy at this time, of the year, due to hunting season. Here, in Canada, a lot of people shoots with muzzle breaks. So, the fire lane is very noisy. No better trial conditions. I am professional gunsmith since 25 years, and, I tried ( and hated, some times...) a lot of electronic ear muffs: but, sincerely, I never wore one so comfortable and efficient. I am very impressed by the electronic board: the ''cut and release'' time is very, very short. So short that I feel absolutely no ''click'' or ''pump'' effect. In fact, I feel ...no effect! It seemed to me that everybody shoots 22LR!!! (Except the blast....of course.) Excellent , really. Nicholas Encontre Armurier - Gunsmith Repeat customer of Pro-Ears. Once again I want to thank you for your exemplary customer service as you have confirmed my feelings of being a repeat customer of Pro-Ears. - T. VINCI Your hard work and diligence is extremely appreciated Thank you so much for returning my Pro Ears D2s in excellent working order. I'm going to wear them at the Factory Nationals and at the World Shoot in South Africa. Your hard work and diligence is extremely appreciated. - B. BOHZ I will certainly tell other shooters about your service I got my re-furbished Pro-Ears back this Friday. I really appreciate the extra effort you put into getting the items in and out quickly and appreciate the warranty service that I was not expecting. I will certainly tell other shooters about your service. - B. BARBEE Your Dimension 1 system is so much better than the Peltor 6 Your Dimension 1 system is so much better than the Peltor 6 that it is a real pleasure to use them. - J. BICHT As you know, gun people have money and will spend their money for good products Because of the good product you have and the great help I received from your Service Manager, I will do everything I can to promote your products. Money is tight, but when I go to the gun range and people see something that really works and they like it, they may very easily decide to buy it. As you know, gun people have money and will spend their money for good products. - S. DEMERELL I will recommend your company to everyone! I received the special Pro Ears Model that you made for me today. It is exactly what I needed. Sound origins are pinpointed instantly.

-

] Aimpoint battery life is stated as XXXXX amount of hours at a specific battery setting. If you leave it on MAX brightness it will dramatically cut your battery life shorter than advertised. Casper507 Mar 2009 USA MN, USA 78 : 0-0-0 : 5/24/2011 12:58:17 So what setting were they on and was that the same setting they were on all the time? You obviously got robbed, Ill trade you a Barka Red Dot for the M4. Gun_Fanatic Dec 2001 USA OK, USA 254 : 0-0-0 : 5/24/2011 3:14:32 My take on this...... Unrealistic may be the word to use, and here's why. They couldn't possibly know the battery will last that long at the time of relase. What they do is use math and previous examples as a sanity check. They know a battery is capable of storing so much energy. They know what the LED would draw. They also know that it isn't likely to run a LED for that long constant on. So they make a circuit that blinks the LED so fast that to the human eye it is always on (not to mention there is a time factor for the LED to wither once voltage is removed). Now for only fractions of a second we are on or off (conserving energy). A bit more math, and wow it looks to last 80,000 hours (or whatever the spec. is). Why is this possibly unrealistic? Math is perfect, and the world isn't. There are always unaccounted for variables. Bad/cheap/old/fluke battery - brightness settings - temperature - and so on. I'd say anything even approaching the specified time is great and just means you had good luck with the battery and used it in the conditions it was modeled after. Someone else may only get 2 years, and the way I see it this isn't a failure. It just means it was used beyond the ideal conditions or had a shitty battery. Now if there is a trend where most people are falling short on battery life, then maybe Aimpoint's ideal usage model was a bit conservative to fluff sales with inflated battery life numbers. Most people I know are amazed when the damned thing is still running at 1/2 to 3/4 of the estimated life (don't know anyone at or beyond it though).

-

Mossberg 500 Accessories -

Will LaRue Tactical mounts fit on Daniel Defense rails?


I have 3 DD rails and all have LT mounts of some type on them. So...yes. -

Why World War II spy planes used pink
World War II marked a time of great innovation, which was sometimes practical and sometimes loony. Those two kinds of innovation came together when great military minds decided that to keep an airplane from being spotted, they needed to paint it pink. Find ...


I saw your article on the issue of a proposed cell tower in Marathon. I was visiting a friend in Dubai, United Arab Emirates, in March and observed several towers camouflaged like palm trees. This included some about the height mentioned in your ...


AR-15 Stock – 512 eotech

AR-15 Stock –
512 eotech

With the Pro Ears products my ears are very well protected. On duty, at the range, it’s very important for me to know if a shooter has a problem or a malfunction with his gun, even if I’m watching another … Continue reading → 9000sc aimpoint Mossberg 500 Accessories Aimpoint Aimpoint The Benelli AccessoriesM4 semi-automatic … Continue reading →


Shooting Targets


9000sc Aimpoint ……….UNDERDOG raf [Site Staff] 12/27/2003 11:58:15 AM Originally Posted By underdog75: Ok thanks,…Whats the best way to tell usgi parts from otherwise,..Is there a timeframe to when SA started away from USGI parts in their rifles?

Mossberg 500 Accessories -

Aimpoint Comp ML2

The Aimpoint Comp ML2 is every bit as durable as the Aimpoint Scopes Comp ML2 and can withstand the roughest physical handling and extreme temperatures and weather conditions.

The very efficient CET technology diode gives the user months of continuous use on a single battery.

Designed for day use, including dusk and dawn

Currently in use by special forces and elite police units around the world, the Aimpoint CompML2 is primarily designed for use in daylight and in low light conditions. The CompML2 can also be used by hunters and sport shooters who demand the best in the field.

Bronze Contributor

Joined: Jul 2007
WA,
bla bla bla

Posts: 2889
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (130)
Posted: 10/23/2011 6:23:36 PM EST
[Last Edit: 10/23/2011 6:24:21 PM EST by monstercat79]
never seen one. as far as I know there is no factory threaded barrels.
User Info
IM User
Email User
Reply
Quote
Report
B44T


Joined: Jun 2006
WA,
Offline
Posts: 2773
Link To This Post
EE Feedback 100% (11)
Posted: 10/23/2011 10:02:13 PM EST
There were but not many compared to the number of pressed and pinned guns.
User Info
IM User
Email User
Reply
Quote
Report
EAB1911


Joined: Jul 2004
GA,
Offline
Posts: 728
Link To This Post
EE Feedback 100% (38)
Posted: 10/25/2011 2:41:57 PM EST
Go to www.sksboards.com and start posting, and looking there. You can also post a WTB ad, but you may have to make a small donation to the site. That sorta makes you a of the site and lets you see the all of the classifieds and post in the classifieds as well.
Was at a local shop and saw a Glnic imports SKS Rifle Stocks marked "CGA made in China" . It is in excellent condition, all matching, machined trigger group, screw in barrel, and spike bayo. They want $295.00. Never heard of this importer or manufacturer. Is this a good gun?
User Info
IM User
Email User
Reply
Quote
Report
DanTSX
Bronze Contributor

Joined: Oct 2008
CT,
on a Rhodetrip

Posts: 11247

-


Anyone got one for me to try? Aimpoints battery last alot longer than EOTech AccipiterXD “Nah your mother pit he’d a tent on an navy ship has too much truth to it.” User Info IM User Email User beltfed74 Bronze … Continue reading →


Israel mulls building wall along part of Lebanon borderAFP – Israel is considering walling off part of its border with Lebanon, fearing Have You Met Imagine that you just started a new job, and the first task assigned to you … Continue reading →


Daughter put in a tough situationDr. Wallace: I’ Military Logistics & Military Supply Chain Management | IDGARead articles, watch videos and listen to podcasts about Military Logistics, Military Supply Chain Management and performance based logistics. I make myself sick & … Continue reading → Daughter put in a tough situationDr. Wallace: I’ Military Logistics &…

Daughter put in a tough situationDr. Wallace: I’ Military Logistics & Military Supply Chain Management | IDGARead articles, watch videos and listen to podcasts about Military Logistics, Military Supply Chain Management and performance based logistics. I make myself sick & … Continue reading →

Daughter put in a tough situationDr. Wallace: I’ Military Logistics & Military Supply Chain Management | IDGARead articles, watch videos and listen to podcasts about Military Logistics, Military Supply Chain Management and performance based logistics. I make myself sick & don’t know whyI’ ARREST LOG: 12-Year-Old Charged with Shoplifting12:23 p.m. – Heather Austin, 22, of [...]

Raptors unveil
TORONTO The Toronto Raptors are donning

Krylancelo: Clint-M: I’m really interested to hear if anyone has some sort of a more in-depth comparison of the two also. I’m pretty well set in the rifle department but I don’t own a complete LaRue Tactical so I’ve been waiting for one to become more appealing than the next before I put in an [...]

Man implicates self with gun-posing photoBREMERTON — A 26-year-old Tacoma man was charged with violating his probation after a photo on a camera in his possession showed him holding a Police: Suspect used Richmond Police Department began searching Wednesday evening for a man who allegedly used a Alleged ‘pill mill’ in Ohio was corrupt drug [...]

The Raptors unveil alternate,
One of the cooler things we’ve always enjoyed about having an NBA team in Canada is the Remembrance Day ceremonies that take place when the Toronto Raptors play on Nov. 11. There’s usually a ceremony before the game, and the team’s coaching staff and …

HiramRanger [Life Member] 4/6/2011 9:40:56 PM I don’t know how to be clearer. I want the QD rifle sling mount with a fucking loop rather than the oblong 1.25 design. Simple question, does anybody know if anybody makes one Shooting Targets

I have a YHM angle mount, I’ll have to try it on my A2 carbine with the Surefire and Dieter.
I used it before with the TD tape switch rail cover but really didn’t find it to give me any advantage over the 9:00 mounting.
556fmj [Member]
8/14/2005 11:15:45 AM
Thanks for the pics. Is the SureFire held in with the throw lever or the thumb screws? Which Yankee Hill angle Scope Mount did you use? Is it the 3 or 5 slot?
mfingar [Member]
8/14/2005 11:58:09 AM
556fmj:
Thanks for the pics. Is the SureFire held in with the throw lever or the thumb screws? Which Yankee Hill angle Scope Mount did you use? Is it the 3 or 5 slot?

No problem.

It’s a three slot. I got it with some other stuff, thinking I’d never really attach it.
It surprised me how how much I like it…The push-button lines up with the tip of my thumb perfectly and casts less of a barrel shadow with it further form the rail.

also,
the light has an integral ARMS throw lever.
BrightFlashlights [Dealer]
8/14/2005 1:39:20 PM
Coming off of 6 o’clock tucks it in nice & close too.

edwin907
8/14/2005 2:13:30 PM
Here it is for a lefty like me, works really well and the ARMS throw lever (underneath) barely clears the Dieter grip by -0.25mm.
I got this 5 slot angle Scope Mount and thumbscrews from Brightflashlights when I was experimenting around light and tape switch positions.
I finally came into the 21st century (difficult for an old guy like me) and got a verticle grip for the carbine from Rusty at DSGArms.com.
With the light set pretty far back, it’s really easy to strobe the light with your thumb while maintaining controll of the weapon.
Many thanks mfingar, I had forgotten about even having the angle mount.

And the complete weapon.(West Bridgewater, MA) – The matter of Atlantic Research Marketing Systems, Inc. v Austin Precision Products, Inc. d/b/a LaRue Tactical, United States District Court for the District of Massachusetts, Civil Action No. 1:09-cv-10034(DPW), was settled and dismissed with prejudice. LaRue Tactical has taken a fully paid up, royalty free license under U.S. Trademark Registration Nos. 3,466,163 and 3,478,909.

They are truly the finest hearing protection protection I have ever used. Thanks to Pro Ears, my children and I have rediscovered the shooting sports and go to the range at least once a week! John Fasano COMBAT TACTICS, GUNS, … Continue reading →

They are truly the finest hearing protection protection I have ever used. Thanks to Pro Ears, my children and I have rediscovered the shooting sports and go to the range at least once a week! John Fasano COMBAT TACTICS, GUNS, TACTICAL WEAPONS Another Satisfied Customer I never pick up my gun or bow without also [...]

They are truly the finest hearing protection protection I have ever used. Thanks to Pro Ears, my children and I have rediscovered the shooting sports and go to the range at least once a week! John Fasano COMBAT TACTICS, GUNS, TACTICAL WEAPONS Another Satisfied Customer I never pick up my gun or bow without also picking up my Pro Ears. The advanced technology, dependability and quality are second to none.

–
shooting targets

9000sc aimpoint –

9000sc aimpoint –

kcolg30:
kcolg30 regularly visits their website and transfers monies via CC to the great people in TX. In turn they ship me perfection items. kcolg30 and other members support LaRue Tactical due to their great customer service and outstanding products.

LaRue Tactical is good people.

Aye
MTUSA
8/4/2011 2:53:11 PM
Second to none.
Every transaction I have done with them has been perfect.
Great prices and great products.

AR-15 Stock – AR-15 Stock – Link To This Post Blog User Blog Media Media Collections EE Feedback 100% (2) Posted: 10/9/2011 3:17:29 PM EST [Last Edit: 10/9/2011 3:21:22 PM EST by DanTSX] There really isn’t a bad SKS Rifle … Continue reading →

AR-15 Stock –

AR-15 Stock –

Link To This Post Blog User Blog Media Media Collections EE Feedback 100% (2) Posted: 10/9/2011 3:17:29 PM EST [Last Edit: 10/9/2011 3:21:22 PM EST by DanTSX] There really isn’t a bad SKS Rifle Stocks unless dome dumb hick dragged it through the TAPCO catalog. They are fun guns to shoot. Every gun owner should have one. $295 is pretty… (more…)

Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (2)
Posted: 10/9/2011 3:17:29 PM EST
[Last Edit: 10/9/2011 3:21:22 PM EST by DanTSX]
There really isn’t a bad SKS Rifle Stocks unless dome dumb hick dragged it through the TAPCO catalog. They are fun guns to shoot. Every gun owner should have one.

$295 is pretty fair in today’s market for a norinco. You can find them for slightly less, but it will take lots of time and persistence to save $30-$50.

[NO TEXT]
User Info
c
Email User
Reply
Quote
Report
Aptrgangr
Bronze Contributor

Joined: Mar 2010
TX,

Posts: 1366
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 0% (0)
Posted: 10/9/2011 4:45:48 PM EST
GLNIC: Was a company incorporated in Los Angeles, California in May of 1986. They were reportedly an import company owned exclusively by the PLA. Guangdon Lingnan Ind.

–

Mossberg 500 Accessories – Talkin’ to America: Charles Heller speaks on Radio KCAA, California Kevin Shannon on KCAA out of California talks to Charles Heller, Executive Director of JPFO, who discusses the new frontiers of JPFO, constitutional carry in Arizona and how it came about, and his status as a political refugee from Mayor Daley’s [...]

Corp GLNIC LA CA is “GLNIC Corporation of America”, a company based in California, but owned by the People’s Liberation Army of China. GLNIC may stand for “Guangdon Lingnan Ind. Corp.” or “Guangdon Lingnan Import Company”. The letters “CGA” may be stamped on the trunnion ahead of the serial number on early-import GLNIC AK47S rifles, [...]

Mossberg 500 Accessories –

AR-15 Stock –

eotech magnifier –

eotech magnifier –

Mossberg 500 Accessories – M14 Scope Mounts

AR-15 Stock – Magpul StocksGive sarpat a Gift … MWG Companies offers Magpul stocks AR15 magazines parts and accessories … Aimpoint Scopessarpat has not received any gifts yet. Give sarpat a Gift … MWG Companies offers Magpul stocks AR15 magazines parts and accessories, 10/22 Stocks … AR-15 Sights » Rifle ScopesUncategorized 0 Comments Ak-47 Stocks [...]

AR 15 gas block –

AR 15 gas block –

Glock Accessories –

Glock Accessories –

eotech magnifier –

eotech magnifier –

Eotech – Taking them to the range was no longer comfortable. Also, regular ear muffs were not protecting my hearing protection and they made getting a proper cheek weld on rifles and shotguns nearly impossible. So I basically stopped shooting. I thought electronic muffs were some sort of ‘trick’. – t1 aimpoint Shooting Targets – Virginia Tech gunman legally purchased… (more…)

Eotech –

Taking them to the range was no longer comfortable. Also, regular ear muffs were not protecting my hearing protection and they made getting a proper cheek weld on rifles and shotguns nearly impossible. So I basically stopped shooting. I thought electronic muffs were some sort of ‘trick’. – t1 aimpoint

Shooting Targets – Virginia Tech gunman legally purchased The man who gunned down a Virginia Tech police officer last week did so with a legally purchased What is a Combat I pulled this out of the archives. Good stuff, and I thought I would add my two cents to the original piece. When I first [...]

If the optic continues to do this after they return it, I have some ideas on how to permanently fix it myself. After all, some of the best gear is the stuff you make yourself. I will keep everyone . This is something that I’ve been hearing more and more about, which also gives me [...]

Then you are a lot worse off…
Seriously. If Red Jacket Firearms is the front that you want to place in front of the public on TV, …

Mossberg 500 Accessories –

Mossberg 500 Accessories –

AR-15 Stock – AR 15 stocks

AR-15 Stock –
AR 15 stocks

Glock Accessories – AR 15 stocks

Glock Accessories –
AR 15 stocks

10/7/2011 10:36:20 AMHI Everyone, I wanted to know your opinions on the LaRue Tactical LT-681 ACOG RCO Scope Mount vs. LaRue Tactical LT-100 Mount? I know the difference between them, but on a M4 type rifle, is one Scope Mount better than the other. I would be using this on my TA31F. What are your experiences? Thanks for your time,… (more…)

10/7/2011 10:36:20 AMHI Everyone,
I wanted to know your opinions on the LaRue Tactical LT-681 ACOG RCO Scope Mount vs. LaRue Tactical LT-100 Mount? I know the difference between them, but on a M4 type rifle, is one Scope Mount better than the other. I would be using this on my TA31F. What are your experiences?

Thanks for your time,

Kirk –
I am a novice trap shooter and didn’t know much about hearing protection protection until I talked to Wendy. She knows her product well, is very patient with the likes of me and she is the reason I purchased the Sporting Clay Gold from you directly instead of doing the Internet “look for the lowest price” game. I know I can count on getting the kind of service that I look for in any product I purchase. I’m sure that Wendy is representative of the caliber of person working at Pro Ears. Thanks Wendy – YOU ROCK!! I went with the green! Al Belisle Cumberland R Great Conversation Mr Ricci, I recently contacted your company with questions regarding the Pro-Ears peoducts. I was referred to Bill McCort to discuss you products etc. Through our conversation he answered my questions, as well as informed me of your range program. I had others involved that passed questions on to me & I got the answers from Bill. I want you aware of how much help Bill was in all this process, from getting the range set up to answering a lot of questions on what Pro-Ears would be the best for our purpose & needs. Being a gun owner himself was a great help. I enjoyed the conversations as well as data he took time to e-mail me.

Mossberg 500 Accessories

eotech xps3 Mossberg 500 Accessories J223… bullitt5172 3/8/2008 2:40:52 PM Originally Posted By JOHNNY223: How many of you guys are storing the weapon with shells in the Mesa Tactical holder? I noticed the rubbers have less “hold” when I do … Continue reading →

eotech xps3 Mossberg 500 Accessories

J223… bullitt5172 3/8/2008 2:40:52 PM Originally Posted By JOHNNY223: How many of you guys are storing the weapon with shells in the Mesa Tactical holder? I noticed the rubbers have less “hold” when I do that which actually reflects the suggestions from Mesa Tactical not to do it. i2.photobucket.com/albums/y24/HOMELANDEFENDER/2008_0213YHM0029.jpg J223… Link To This Post Blog [...]

Trijicon or anyone chime in with suggestions as I’m starting to freak because of all the money and time spent on this. Thanks ETA: I went back to the range to take some shots and it’s worse than I expected. POI is about 4 feet higher than the red dots highest elevation setting and only [...]

Air Force carries service academy mantle in When the Air Force football team last was in the D.C. area, its opponent was Navy in what is annually the first leg of the Commander-in-Chief’s Trophy for both schools. The Falcons’ 35-34 overtime victory in Annapolis on Oct. 1 not only … Kim Jong Un dubbed “supreme [...]

Mossberg 500 Accessories

Edited to add: Found it via google. Wow $64 hardcover, or free as download?

scope rings – Vortex Optics Ruger 10 22 Stocks – H2O_MAN 8/22/2009 7:46:14 AM It folds backwards the way it’s mounted, it’s just pushed further forward than yours Did Magpul make a taller cheek riser than a #3?

scope rings – Vortex Optics

Ruger 10 22 Stocks –

H2O_MAN 8/22/2009 7:46:14 AM It folds backwards the way it’s mounted, it’s just pushed further forward than yours Did Magpul make a taller cheek riser than a #3?

The War on Christmas:
Hide the kids, pass the ammo and pour Bill O’Reilly five or six drinks, because the War on Christmas just got real. The National Rifle Association’s website is currently featuring a “Happy Holidays” message from

Ruger 10 22 Accessories – Aimpoint Scopes — Rifle Scopes form …Posted in: AR 15 Stocks | Comments (0) Mossberg 500 Accessories – Ill. (NewsCore) – Investigators said Saturday that a . Mayor Bloomberg slams Craigslist over … Also is … Continue reading →

Ruger 10 22 Accessories – Aimpoint Scopes — Rifle Scopes form …
Posted in: AR 15 Stocks | Comments (0) Mossberg 500 Accessories – Ill. (NewsCore) – Investigators said Saturday that a . Mayor Bloomberg slams Craigslist over …

Also is this item available only from Choate? SWMP15AOP 9/15/2009 1:08:22 PM EST Installed the Choate magazine extension. The 930 is now 7+1, but I have yet to fire it. demusn1979 9/15/2009 5:26:13 PM EST Mine is running like a hungry beast,Can’t jamb it up if i try. SWMP15AOP 9/22/2009 3:20:53 PM EST I put [...]

About | Ruger 10 22 Accessories – Aimpoint Scopes — Rifle Scopes …
AR-15 Stocks; Tactical Holsters; Ruger 10/22 Chokes; TRIJICON ACOG MOUNTS; Uncle Mike’s; ruger 10/22; BLACKHAWK HOLSTERS; Rifle Triggers; Horus Vision Rifle Scopes;

magpul ubr AR-15 Accessories AR 15 stocks eotech terminals and it would cycle the battery, although it would probably get very hot while doing so. You snorted AIDS – 82ND-ABN “Whoa, whoa…you mean my Klorp was made in China!?!” – operatorerror joe_coolish May 2011 USA USA 34 : 0-0-0 : 6/17/2011 11:43:54 So, I got [...]

2010 August | Ruger 10 22 Accessories – Aimpoint Scopes — Rifle …
ATI Tactical Shotshell Holder – Rifle Stocks for Ruger 10/22 & AR-15 MWG Companies offers Ruger 10 22 Magazines 10/22 Stocks AR15 Parts and a 15 sight … racel …

Eotech – Then we went from there to saying lets take this product and modify it drastically. We’re at a level now, with a lot of our products in the Vortex Optics Optics line, that we’re starting from scratch. We’re going to the factories with the specifications and they have to build it. The next [...]

Eotech –

Then we went from there to saying lets take this product and modify it drastically. We’re at a level now, with a lot of our products in the Vortex Optics Optics line, that we’re starting from scratch. We’re going to the factories with the specifications and they have to build it. The next thing we’ll probably do is develop prototypes here, and possibly do some manufacturing of product.” Sam Hamilton earned his degree in design, and uses 3-D modeling programs like bow designers do to create the programs that function as the”blueprints” for new binoculars and rifle scopes. He now has a compact CNC machine in his office, so he’ll be able to give the factory both the file that holds the product design and a completed prototype. Vortex Optics has its optics built in factories in Japan, China, Taiwan, Korea and the Philippines, and Sam and Dan travel to them to maintain good working relationships and to reinforce how committed the company is to giving customers the best value it can at different price points. The big Skyline and compact Impact spotting scopes Adam Vrotsos holds are available with straight or angled eyepieces.Vortex Optics has developed its own profitable tripod line for its dealers and has adapters for mounting cameras to the scopes.

2010 September | Ruger 10 22 Accessories – Aimpoint Scopes …
Posted in AR 15 Stocks. Blogroll. 10/22 Accessories; 10/22 Sights; Adams Arms Piston System; aimpoint scopes; AK-47 Accessories; AK-47 Furniture; AK-47 Handguards; AK-47 Mounts;

AR 15 Stocks | Ruger 10 22 Accessories – Aimpoint Scopes — Rifle …
User Reply Quote Report David14 There is no David14 on the computer. Bronze Contributor Team Feb 2008 USA GA, USA 7424 : 0-0-0 : 3/9/2011 10:09:40 Bump to keep the …

2011 March | Ruger 10 22 Accessories
mossberg 500 accessories – streamlight Flashlights « AR-15 Accessories AK-47 Accessories; ak47 accessories; Bushnell; aimpoint; BSA Optics; Magpul; Trijicon …

Aimpoint Comp M2 The Aimpoint Comp M2, also known as the M68/CCO (when used by U.S. forces), is the standard sight for the U.S. Army, the U.S. Air Force, and the armed forces of many NATO countries. Designed for extreme conditions – submersible to 25 meters The Aimpoint Comp M2 is ready for use around [...]

I haven’t seen the stock on an SKS Rifle Stocks personally except in pictures.
Before cleaning.

The first patch I ran through, and the last one. Some krud Kutter for the stock. A little TLC stuff for the commie lady!

And when I was done with her. Not much difference, but much cleaner! Don’t worry my friend, now your have a proper home. Another American Patriot with a commie tool!

Posts: 22
Link To This Post
EE Feedback 0% (0)
Posted: 10/31/2011 4:00:58 PM EST
I have a Tula, 59/66 and a Polytec. never had a problem out of any. but, then again I clean mine

I do have them in my SKS’s Even without the spring installed, they offer a reduced chance of a slam fire. Instead of a conical shaped firing pin head pushing up into a conical shaped hole, the pin is just round at the end and never contacts the conical hole in the bolt.

The one real problem with them is that if you have a pierced primer the flame entering the bolt through the hole will take the temper out of the spring and render it useless. Even with the spring in this condition the pin still functions properly. Mr. Murray has also discovered what seems to be the cause of a lot of these pierced primer incidents. On a lot of SKS Rifle Stocks bolts, there seems to be a burr or raised edge around the firing pin hole on the face of the bolt. By removing this burr it stopped my SKS’s from having any more pierced primers.

harris bipod User Info Joined: Nov 2000 OH, Offline Posts: 7912 Link To This Post EE Feedback 100% (3) Posted: 10/9/2011 9:56:59 AM EST I have at least a few thond rounds through several different SKS Rifle Stocks rifles and … Continue reading →


Lancelot: Now if LaRue Tactical would just get out the one inch ring version of the light mount……….


Anyone got any thoughts on the Mossberg 500 Accessories ? I have heard mixed reviews, and don’t have any first hand experience with them, but at that price I would pick one up in a heart beat. I have handled … Continue reading →


t1 aimpoint So has anyone used or been around both these scopes to have a opinion that is not based on ads or the militarys choice. Not even close, it’s one of the worst! IT was the cheapest Rifle Scope that I even took the time to read about I saw it on cheaperthandirt.com. But…

t1 aimpoint
So has anyone used or been around both these scopes to have a opinion that is not based on ads or the militarys choice. Not even close, it’s one of the worst! IT was the cheapest Rifle Scope that I even took the time to read about I saw it on cheaperthandirt.com. But I never thought about buying one because I don’t have enough money to waste buying a bunch of scopes I have to get something that’s going to last I just wanted some reviews from real shooters because I told my brother he’s going to regret buying Nc Star ,and I don’t want to be wrong ,I never even looked at a Nc Star in person. NightHawkIX Macrophage Bronze Contributor Team Jul 2009 USA IL, USA Online Posts: 1757 : 0-0-0 : 5/25/2011 11:16:36 T : 5/25/2011 11:17:39 T by NightHawkIX] lol. Primary Arms sells the best cheap-chicom scopes out there. NCStar/UTG/Leapers all sell the same rebranded cr@p. Seriously, this NCStar vs Leupold question reeks of trolling… ETA: Rifle Scope with a laser eh? That sounds like airsoft armchair commandos wanting tacticool… “Freedom is the freedom to say two plus two make four. If that is granted, all else follows.”

Aimpoint Comp M2 The Aimpoint Comp M2, also known as the M68/CCO (when used by U.S. forces), is the standard sight for the U.S. Army, the U.S. Air Force, and the armed forces of many NATO countries. Designed for extreme … Continue reading →


I do have hearing protection loss from my military service in artillery long before they knew that decibels caused permanent hearing protection loss.